When you prepare for Citrix 1Y0-A28 certification exam, it is unfavorable to blindly study exam-related knowledge. There is a knack to pass the exam. If you make use of good tools to help you, it not only can save your much more time and also can make you sail through 1Y0-A28 test with ease. If you want to ask what tool it is, that is, of course Pass4Test Citrix 1Y0-A28 exam dumps.

Pass4Test is the leader in the latest Citrix 1Y0-118 exam certification and exam preparation provider. Our resources are constantly being revised and updated, with a close correlation. If you prepare Citrix 1Y0-118 certification, you will want to begin your training, so as to guarantee to pass your exam. As most of our exam questions are updated monthly, you will get the best resources with market-fresh quality and reliability assurance.

Since Citrix 1Y0-220 certification is so popular and our Pass4Test can not only do our best to help you pass the exam, but also will provide you with one year free update service, so to choose Pass4Test to help you achieve your dream. For tomorrow's success, is right to choose Pass4Test. Selecting Pass4Test, you will be an IT talent.

You choosing Pass4Test to help you pass Citrix certification 1Y0-A28 exam is a wise choice. You can first online free download Pass4Test's trial version of exercises and answers about Citrix certification 1Y0-A28 exam as a try, then you will be more confident to choose Pass4Test's product to prepare for Citrix certification 1Y0-A28 exam. If you fail the exam, we will give you a full refund.

Exam Code: 1Y0-A28
Exam Name: Implementing NetScaler 10 for Networking and Traffic Optimization
One year free update, No help, Full refund!
1Y0-A28 Exam Dumps Total Q&A: 123 Questions and Answers
Last Update: 2014-04-05

1Y0-A28 Exam Dumps Detail : Click Here

Exam Code: 1Y0-118
Exam Name: Citrix WinFrame 1.8 Administration
One year free update, No help, Full refund!
1Y0-118 Exam Questions Total Q&A: 40 Questions and Answers
Last Update: 2014-04-05

1Y0-118 Exam PDF Detail : Click Here

Exam Code: 1Y0-220
Exam Name: Citrix Metaframe XP 1.0 for Windows
One year free update, No help, Full refund!
1Y0-220 Exam Dumps Total Q&A: 150 Questions and Answers
Last Update: 2014-04-05

1Y0-220 Study Guide Detail : Click Here

Are you worrying about how to pass Citrix 1Y0-220 test? Now don't need to worry about the problem. Pass4Test that committed to the study of Citrix 1Y0-220 certification exam for years has a wealth of experience and strong exam dumps to help you effectively pass your exam. Whether to pass the exam successfully, it consists not in how many materials you have seen, but in if you find the right method. Pass4Test is the right method which can help you sail through Citrix 1Y0-220 certification exam.

After you used Pass4Test Citrix 1Y0-220 dumps, you still fail in 1Y0-220 test and then you will get FULL REFUND. This is Pass4Test's commitment to all candidates. What's more, the excellent dumps can stand the test rather than just talk about it. Pass4Test test dumps can completely stand the test of time. Pass4Test present accomplishment results from practice of all candidates. Because it is right and reliable, after a long time, Pass4Test exam dumps are becoming increasingly popular.

1Y0-A28 Free Demo Download: http://www.pass4test.com/1Y0-A28.html

NO.1 An engineer has two NetScaler devices in two different datacenters and wants to create a high
availability (HA) pair with the two devices, even though they are on two different subnets.
How can the engineer configure the HA Pair between the two NetScaler devices?
A. Configure StaySecondary on the second datacenter appliance.
B. Ensure that INC mode is enabled during the creation of the HA Pair.
C. Enable the HAMonitors on all interfaces after the HA Pair has been created.
D. Change the NSIP of the second appliance to be on the same subnet as the first appliance.
Answer: B

Citrix   1Y0-A28 Test Answers   1Y0-A28 practice test   1Y0-A28

NO.2 The network engineer would like all HTTP and HTTPS requests that travel through the
NetScaler to have an HTTP header added with the source IP address for logging on the web servers.
How should the network engineer accomplish this?
A. Enable Web Logging
B. Enable the client IP option
C. Configure the TCP Parameters
D. Enable the 'Use Source IP mode'
Answer: B

Citrix exam   1Y0-A28 test   1Y0-A28 Bootcamp   1Y0-A28
6. A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A

Citrix test answers   1Y0-A28 Test Questions   1Y0-A28 Exam Prep   1Y0-A28 certification training   1Y0-A28   1Y0-A28 Test Questions
7. Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces;
however, the engineer has been told that the NetScaler must now only use a single interface for this
network.
The engineer removes the channel and immediately notices a decrease in network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B

Citrix VCE Dumps   1Y0-A28 test questions   1Y0-A28 questions   1Y0-A28   1Y0-A28 Practice Exam
8. Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting
the services are
on an IPv4 network. The
engineer has already enabled IPv6 on the NetScaler. What does the engineer need to do in order to
provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C

Citrix test questions   1Y0-A28 test questions   1Y0-A28   1Y0-A28 demo   1Y0-A28 Test Questions
9. Scenario: An engineer executes the following commands: add vlan 2 bind vlan 2 -ifnum 1 / 2 add
ns ip 10.110.4.200 255.255.255.0 bind vlan 2 -IPAddress 10.110.4.200 255.255.255.0 What type of
IP address has been added to the NetScaler?
A. VIP address
B. NSIP address
C. SNIP address
D. GSLB Site IP address
Answer: C

Citrix braindump   1Y0-A28 pdf   1Y0-A28 questions
10. Scenario: A network engineer needs to configure Citrix NetScaler to provide Access Gateway
services to VLAN 2 using interface 1 /1 only, while also using interface 1 / 2 to provide load balancing
services to VLAN 3. How could this result be achieved?
A. Disable static route advertisement.
B. Disable layer 2 mode Create 2 untagged VLANs - VLAN 2 and VLAN 3 Bind VLAN 2 to Interface 1 /1
Bind VLAN 3 to Interface 1 / 2
C. Enable Layer 3 mode Create a Channel Interface using Interface 1 /1 and 1 / 2 Create 2 VMACs Bind
a VMAC to interface 1 /1 and 1 / 2
D. Configure policy-based routing using the Interface option as a filter.
Answer: B

Citrix   1Y0-A28 Test Questions   1Y0-A28 demo
11. Scenario: A network engineer needs to re-configure the NetScaler to utilize two new VLANs -
VLAN2 and VLAN3. VLAN2 is an untagged VLAN and VLAN3 will require a .1q compliant tag.
Interface 1 /1 is the only interface that
will be used on the NetScaler. How could the engineer configure
the NetScaler so that it can communicate with both networks?
A. Change the NSVLAN to 3 Add VLAN 2 and bind interface 1 /1 as untagged
B. Enable the Tag all VLANs option on interface 1 /1.
C. Add VLAN2 and bind interface 1 /1 as untagged Add VLAN3 and bind interface 1 /1 as tagged
D. Add a SNIP for each VLAN Enable management access on the SNIP for VLAN3
Answer: C

Citrix questions   1Y0-A28 certification training   1Y0-A28 Latest Dumps   1Y0-A28 Exam PDF   1Y0-A28 study guide
12. Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B

Citrix   1Y0-A28 test questions   1Y0-A28 VCE Dumps

NO.3 A network engineer needs to upgrade both appliances of a High Availability (HA)
pair. In which order should the network engineer upgrade the appliances?
A. Disable high availability and upgrade one node at a time.
B. Upgrade the primary node first without disabling high availability.
C. Upgrade the secondary node first without disabling high availability.
D. Perform the upgrade simultaneously without disabling high availability.
Answer: C

Citrix test answers   1Y0-A28 demo   1Y0-A28   1Y0-A28 Practice Exam   1Y0-A28 questions   1Y0-A28 questions

NO.4 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize
the number of ARP requests. Which feature should the network engineer enable to minimize ARP
requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D

Citrix Dumps PDF   1Y0-A28 dumps torrent   1Y0-A28 dumps   1Y0-A28 certification training

NO.5 What should a network engineer do to prevent unauthorized users from using the root user
account?
A. Reset the nsroot account.
B. Change the nsroot password.
C. Create an authorization policy.
D. Bind a policy to the root user account.
Answer: B

Citrix Latest Dumps   1Y0-A28   1Y0-A28   1Y0-A28 exam